Security Equipment - Transaction Drawers

Transaction Drawers
	Alliance Security Group can supply transaction drawers to fit virtually any application. We feature these quality drawers from E.F. Bavis, Lane Banking Equipment, and Creative Industries in a wide variety of sizes and styles for both interior and exterior use. Please call and we will help you select the right drawer for your needs.


	P.O. Box 667 West Simsbury, CT 06092	Phone: (860) 523-8366 Fax: (860) 231-0411

Copyright © 2010, Alliance Security Group, LLC

	E.F. BAVIS POWERED TRANSACTION DRAWER
The Bavis fully powered Transaction Drawer™ is much different than other drawers. This drawer does not use gears, pulley or cables like most others. It uses a twin lead ball screw rod assembly which enables it to extend farther, and carry heavier and larger items than most other drawers. The drawer uses flat compression seals, rather than brushes. This increases the ergonomics of the work area by reducing noise, while preventing cold air and contaminants from entering the building. The Bavis Transaction Drawer features: Electronic Brake for precise drawer positioning Solid State Electronics eliminate belts, gears, pulleys and switches for trouble-free operation Large capacity eliminates need for package receiver Optional Full-Duplex Audio communications High durability powder coat finish Drop front operation for convenience & safety Manual operation available in case of power failure Designated for use with retrofit or new construction Exterior audio panel available as an option in Stainless Steel 18" of extension for greater accessibility Large 16" x 12.5" x 5.75" interior usable dimensions w/25lb capacity Optional heater makes drawer warm to the touch .

	E.F. BAVIS MANUAL TRANSACTION DRAWER
This drawer, like the powered model is constucted of high tech machined components and designed for the rigors of a drive-thru environment. The drawer was built to provide the maximum in customer and employee conveniences. The drawer's design allows for easy operation using a 2 to 1 movement ratio. For every one inch of force applied to the handle the drawer moves two inches. An additional operator convenience is the use of compression seals, versus brushes, around the exterior door and a slide door around the handle preventing outside air from entering when the inside door is open and the handle is being moved. Customers can access the drawer either from the top, in taller vehicles, or from the front. This drawer's large transaction hold down bar is also a plus, preventing currency and paper transactions from blowing away. The outer shell of this drawer is 11 gauge cold finished steel and the drawer bin is .050"aluminum. The .080" aluminum door drops down and toward the building reducing the chance of the operator hitting a vehicle. The bin size is 16"(d) x 11"(w) x 6.25"(h) with a maximum extension of 15".

	E.F. BAVIS BASIC TRANSACTION DRAWER
	The low cost Basic Manual Transaction Drawer was designed to be used as a stand alone drawer or with our Basic 32" Level 1 Bullet Resistant Window. Combined they offer a secure and energy efficient, cost effective alternative to sliding glass windows. There are a number of audio options available for use with this drawer each allowing for private communications. Built-in customer audio components including speaker, microphone and call button 14 gauge steel construction Built-in countertop Clear interior door Drawer lock Exterior door seals Automatic locking customer door for greater security Optional custom colors available Optional drawer heater making drawer warm to the touch

LANE LDD1 STAINLESS STEEL DEAL DRAWER
This field proven unit from Lane Bank Equipment has a large capacity drive motor & custom teller convenient push buttons. There is a built in power switch for connecting an external heater (optional). The overall design permits access for deposits from various vehicle heights Tested at over 1100 revolutions with 60 lbs, the suspension will handle over 300 lbs. Lane Bank Equipment Transaction Drawers feature: Large Capacity--Accommodates 12" x 9" x 6.75" items One motion conversion from electrical to manual Durable and attractive Stainless Steel exterior Pre-wired for sound and audio system Low maintenance Drop front Hinged cover for maintenance Convenient drawer lock Drawer extends 12" to 18"

	TRANSACTION DRAWER 1924-DD
The 1924-DD Transaction Drawer from Creative Industries is Level 1 Bullet Resistant, and also weather resistant. It is well suited for drive-up service. This drawer moves on heavy duty ball bearing slides and the front doors open as the drawer is extended. The drawer locks automaticllay when closed. The lexan lid permits a clear view inside the drawer, and remains closed when the drawer is open to the customer. A bill clip and coin pad are furnished inside the drawer to hold currency. Drawer can be mounted in a wall 1.0625" up to 8.625" thick. Construction: Drawer and Housing are Bullet Resistant Plastic Doors, Hood and Flange are Stainless Steel Inside drawer dimensions: 14.5"(w) x 20"(d) x 12"(h) Drawer extension: 15.5" Wall opening size: 19.25"(w) x 16.5"(h)


*Vision & Service Windows* Bavis Powered Drawer Bavis Manual Drawer Bavis Basic Drawer Lane SS Drawer 1924-D Drawer A Series Drawer 1724-WW & 1728-WW Drawers 1724-SCL Drawer 1724-SS Drawer 2725-SS Drawer Deal Drawer Cash Drawer Counter Top w/Drawer Security Equipment product list
	Our Privacy Policy

A SERIES TRANSACTION DRAWERS

Creative Industries' A Series Transaction Drawers are weather resistant as well as Bullet Resistant. The front Stainless Steel panel pivots upward as the drawer moves outward. Drawer movement is provided by smooth extension slides. It locks with a drop bolt. The lexan lid stays closed as the drawer is extended.

Construction: Drawer unit: Aluminum frame, Stainless Steel hood, Bullet Resistant plastic

Model	Overall Size	Inside Drawer Dimensions	Wall Opening
1715A	20.875" W x 13.125" H x 15" D	12.75" W x 5.25" H x 12.375" D	17.5" W x 9.625" H
1818A	21.875" W x 15.625" H x 18" D	13.75" W x 7.5" H x 15.375" D	18.5" W x 12" H
1824A	21.875" W x 18.75" H x 24" D	13.75" W x 10.625" H x 21.375" D	18.5" W x 15.125" H
2725A	30.875" W x 14.75" H x 24.75" D	22.75" W x 7.375" H x 22.125" D	27.5" W x 11.625" H
1224A	15.875" W x 15.875" H x 24.125" D	8" W x 8" H x 21" D	12.5" W x 12.5" H

	1724-WW AND 1728-WW TRANSACTION DRAWERS
WW Series Transaction Drawers are designed with exterior walk-up service in mind. They have an extra deep Stainless Steel hood which enables them to fit thicker walls. The Lexan lid prevents direct entry from outside air while allowing a clear view of the drawer interior. Drawer movement is controlled by a large aluminum handle on rear. Front of unit is Stainless Steel. Easy operation is allowed by smooth running ball bearing extension slides. Drawer is furnished with bill clip and brush type coin pad and locks with a drop bolt through the bottom of the drawer into the housing. Construction: Stainless Steel hood and front panel

TRANSACTION DRAWER 1724-SCL

This patented 1724-SCL Transaction Drawer has its lid and front door synchronized to open and close with no chance of the lid being left open when the drawer is extended. As the drawer closes, the lid returns to a slanted position, allowing the operator access to its contents. Level 1 Bullet Resistant

Construction:
Drawer: Bullet Resistant plastic
Housing: .75" exterior plywood with Stainless Steel on exposed surfaces
Face, hood, lid handle and coin scoop: Stainless Steel

Drawer Extension: 14.25"
Wall opening size: 17.5"(w) x 11.5"(h)

Model	Overall Depth
1724-WW	24.25"
1728-WW	28.25"

TRANSACTION DRAWER 1724-SS
The 1724-SS Transaction Drawer is suited for drive-up and walk-up service. This drawer is weather resistant. The lexan lid allows clear view of the contents while preventing direct entry of outside air. Push button latch keeps lid locked when closed. Level 1 Bullet Resistant As the drawer moves outward the Stainless Steel front panel pivots upward and inward. Drawer locks with drop bolt. A coin scoop and bill clip are included. Construction: Drawer: Bullet Resistant plastic Housing: .75" exterior plywood with Stainless Steel on exposed surfaces Face, hood, lid handle and coin scoop: Stainless Steel Drawer Extension: 15" Wall opening size: 17.5"(w) x 10"(h) Drawer inside dimension: 13"(w) x 22"(d) x 6.5"(h)

TRANSACTION DRAWER 2725-SS
The 2725-SS Transaction Drawer is designed for exterior walk-up and drive-up service. This drawer is weather resistant as well as Bullet Resistant. The Stainless Steel front panel pivots upward and inward as the drawer moves outward. Movement is provided by smooth running extension slides. Drawer locks with a drop bolt. Coin scoop and bill clip are included. Clear Lexan lid allows a clear view of contents. Level 1 Bullet Resistant Construction: Drawer and Housing: Bullet Resistant plastic Face, hood, and coin scoop: Stainless Steel Drawer Extension: 19" Wall opening size: 27.375"(w) x 11.5"(h) Drawer inside dimension: 23.25"(w) x 22.5"(d) x 7.5"(h)

DEAL DRAWER

This Deal Drawer recesses in a counter top along the front to achieve a flush appearance. Glazing (by others) sets above the flat hood portion of the drawer. Full width handle across the rear of the drawer, along with smooth solid bearing slides, allows easy operation. Lexan lid stays closed when drawer is extended.

Constuction: Stainless Steel

Model	Depth	Cut Out Size
1616	16.25"	14.5" W x 15" D x 4" H
1620	20.25"	14.5" W x 19" D x 4" H
1622	22.25"	14.5" W x 21" D x 4" H

CASH DRAWER 1618
The 1618 Cash Drawer has a Stainless Steel housing with a Bullet Resistant plastic drawer. This unit mounts in a counter top along the front edge. Glazing (by others) should set above the flat hood portion of the drawer. As the drawer slides out, the Stainless Steel front panel pivots upward. Movement is controlled by a full width handle across the rear of the drawer. The lexan lid stays closed when the drawer is extended. This unit is designed for long life as there are no slides to wear out. Construction: Drawer: Bullet Resistant plastic Housing: Stainless Steel Drawer Extension: 9" Counter top opening size: 14.4"(w) x 17.125"(d) x 5.7"(h) Drawer inside dimension: 12"(w) x 14.625"(d) x 3.625"(h)

COUNTER TOP WITH DRAWER
This Stainless Steel Counter Top with built-in Drawer is ideal for stadiums, motels, banks or gas stations. Ample space is provided on top for a writing surface. The Drawer moves quietly on solid bearing slides and blends smoothly into the front of a counter top when closed. Drawer locks via a turn latch in the handle. Unit is weatherstripped to hold energy loss to a minumum. Level 1 Bullet Resistant Construction: Stainless Steel Drawer inside dimension: 11.875"(w) x 16"(d) x 2.0625"(h)